 |
6204KA/C3 Bearing |
11,29,2016 |
|
6204KA Bearing |
11,29,2016 |
|
6204/C4 Bearing |
11,29,2016 |
|
6204/C3 Bearing |
11,29,2016 |
|
6204 Bearing |
11,29,2016 |
|
6204 Bearing |
11,29,2016 |
|
Bearing 204TN-Z |
11,28,2016 |
|
Bearing 204KA-Z |
11,28,2016 |
|
Bearing 0204 |
11,28,2016 |
|
Bearing 180204 |
11,28,2016 |
|
| News details |
Bearing packing specifications
|
| Time：2016.10.28 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
Packaging sub-packaging and packaging:
Bearing in the manufacturing is completed and tested, that is, cleaning and rust treatment, and then into the packaging, in order to achieve waterproof, moisture, dust, shock, maintenance of bearing quality and accuracy and ease of use and marketing purposes .
Bearing inner packing according to the rust-proof period is divided into three categories:
① short rust period Packing: rust period of 3 to 6 months, suitable for large quantities shipped to the same subscribers, will be put into use in the short term bearings. The two sides agreed to facilitate the use of the principle, the use of simple packaging.
② general anti-rust Packing: rust a year for general-purpose bearings.
③ long rust period Packing: rust period of two years, for special and precision bearings.
Bearings are made of polyethylene plastic drum, kraft paper, plain and wrinkled polyethylene composite paper, paper box, polyethylene or polyethylene plastic film, nylon fastening tape or plastic fastening tape, waterproof high-strength plastic tape , Hemp bags and so on. The above materials are required to ensure that the corrosion resistance of materials tested.
Bearing the principle of the packaging method requirements:
① miniature bearings: every 10 to 15 sets of bearings into a plastic tube, every 5 to 10 plastic tube into a carton (or bag, roll).
② medium and small bearings: multi-sets of bearings with polyethylene film, topical kraft paper or polyethylene composite paper package; sets of bearings into a plastic tube (box); single sets of bearings with polyethylene film bag packaging, folding or Seal the bag before loading a tray.
③ large bearings: polyethylene film or polyethylene composite paper single set of packaging, and then into a carton; with polyethylene film bag, a single set of folding bag pocket, and then into a carton; Plastic box; single set of three wrapped wrapped: the inner layer of polyethylene film tape or composite tape, the middle with a fastening tape, the outer layer with a waterproof plastic infiltration.
④ large bearings:
Single set of three wrapped wrapped packaging (ibid.);
Single by four wrapped wrapped: wrapped in the above three wrapped, the outer layer and then wrapped with a layer of hemp belt.
Separable tapered roller bearings with outer diameters ≥150mm shall be lined with polyethylene film before the inner and outer components of the package, or the inner and outer components shall be packaged separately. On the outer diameter ≥ 150mm interchangeable cylindrical roller bearings, easy to knock because of package damage, the general internal and external components can be used separately packaging.
Bearing the general packaging materials and requirements are as follows:
① double corrugated cartons, the total weight per box (gross weight) does not exceed 25kg, outside the box with plastic strapping tied;
② nail box (wooden box), the total weight of each box does not exceed 30kg, outside the box with blue steel banding;
③ calcium plastic corrugated box, the total weight of each box does not exceed 25kg, box love with plastic strapping strapping.
When the product bearing with inner packing is put into the box, it should be filled with plastic bag or plastic film inside the box. If there is space in the box, it needs to fill with dry material such as corrugated paper and paper dust. |
|
|
