 |
6204KA/C3 Bearing |
11,29,2016 |
|
6204KA Bearing |
11,29,2016 |
|
6204/C4 Bearing |
11,29,2016 |
|
6204/C3 Bearing |
11,29,2016 |
|
6204 Bearing |
11,29,2016 |
|
6204 Bearing |
11,29,2016 |
|
Bearing 204TN-Z |
11,28,2016 |
|
Bearing 204KA-Z |
11,28,2016 |
|
Bearing 0204 |
11,28,2016 |
|
Bearing 180204 |
11,28,2016 |
|
| News details |
How to prevent the self-aligning roller bearing rust
|
| Time：2016.11.04 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
Spherical roller bearings are easy to fit on the shaft by using fasteners or retracting. The outer ring raceway is part of spherical spherical roller bearings, bearings with internal aligning performance to adapt to the shaft and seat hole relative deflection, can withstand radial load and shock load, but also can withstand a certain two-way axial load , The bearing can limit the axial displacement of the shaft or housing in the axial clearance of the bearing within the self-aligning roller bearings, the bearing structure and characteristics of the same principle and self-aligning ball bearings, load capacity and speed limit permission , You can substitute for each other.
Longma-aligning roller bearings are double row inner raceway, outer ring raceway design for spherical roller, roller bearing for the drum. Outer ring raceway center and the center of the same bearing to the heart-aligning roller bearings, with self-aligning performance, even in the shaft and the bearing box due to the installation error or axis with flexural vibrating screen spherical roller bearings, so that Inside and outside the ring to produce a tilt of the occasion can also be normal use.
Anti-rust oil to prevent high-temperature bearing rust
1. Soak method: Some small high-temperature bearings are immersed in the anti-rust oil, oil film thickness can be controlled by the temperature or viscosity of rust oil to achieve. So that the surface adhesion of a layer of anti-rust grease method.
2. Brush method: Brush the attention of the uniform application of high-temperature bearing surface, do not produce accumulation, but also pay attention to prevent leakage coating.
3. Spray method: some large-scale anti-rust material is not suitable for the use of immersion method of oil, generally about 0.7MPA pressure filter compressed air in the air clean place for spraying. Spray method for solvent dilution-type anti-rust oil or thin anti-rust oil. This approach must be based on sound fire protection and labor protection measures.
|
|
|
